Welcome to Emax Motor! USA Based Emax Distributer.


0 item(s) - $0.00
You have no items in your shopping cart.


Dquad Obsession Stretched Frame, V2 Armattan Carbon

Availability: Out of stock


As low as: $99.99

Price as configured: $99.99

Quick Overview

This is the V2 version cut by Armattan.

The Dquad Obsession was designed in the Netherlands and we could not wait to get some. However, there are so many X frames on the market we asked for a slight modification, and the stretched X design was born. This design features an aircraft aluminum 7075 grade roll cage to protect your camera and gear. How strong is that? Check out this video of a car sitting on top of the quad. You are NOT going to break this roll cage. The total build weight is 300g.

Why a Stretched X? This design is favored because they track straighter and handle a little better on race courses or trying to maintain a constant direction. They still are very good at freestyle as well.

Build Manual

These include V2 arms


The Obsession is a strong stretched X quad that is suitable for indoor/outdoor, race/freestyle, advanced/middle/beginner with up to 5" props. This frame is easy to build and to service when needed. The frame has 4 swappable 4mm carbon arms that are coming together in the middle without any friction. Why not have a unibody that is 2 gram lighter? That’s because we like to give the pilots a opportunity to get up in the air asap and that’s only possible when you have those nice swappable arms. These 4 arms are held together with a 2mm carbon bottom plate and a 2mm identical Top plate. There is enough room to double stack you hardware, like FC, 4in1 esc, VTX, OSD, RX, and so on.

The main feature is our 7075 Aircraft Aluminium as a roll cage that has 2 1.5mm carbon side plates that holds the FPV cam in place. A recommended FPV cam for this is a HS1190 or HS1177. On the backside of the roll cage you will find a 2mm carbon VTX antenna mount. This VTX antenna mount is installed in a 45deg angle. If you are doing stunts, races or just having the greatest time of your live in the air and like to capture that in HD than a HD action cam is needed. Action cams are having a hard time to survive on a quad. We have made a 3D Gopro session design in 30 and 40deg what can be fitted directly on top of the roll cage without the need of a strap (not included).

Recommended Parts:

  • Emax 2205RS 2300KV
  • 5040-5045 3 Bladed Propellers
  • Cicada 30A ESC (4 pcs)
  • F4 Flight controller
  • Diatone SP3 VTX with OSD
  • Foxeer Mini Ant

Additional Information

  • 235mm size 5” frame
  • Frame weight 95 gram with carbon top plate!
  • Max Prop Size: 5"
  • 4x 4mm carbon arms
  • 2x 1.5mm Carbon bottom/top plate
  • 2x 1.5mm FPV side plate
  • 2x 7075 Aircraft Aluminium roll cage Bracket
  • 1x 2mm VTX antenna mount
  • 1x 3D designed XT60 connector holder
  • 1x Fastener kit incl: bolts, nuts and spacers
  • 1x Battery strap
  • 2x sticker
  • 1x Manual QR code card.
  • No PDB Included